- two 1/1.8" CMOS imagers
- VIS and NIR simultaneous capture
- 3.45 x 3.45 μm pixels
- 1x2, 2x1, 2x2 binning
- Up to 123 fps over 10 gigabits per second interface
- 8, 10 or 12-bits per channel
- Single and multi-ROI modes
- GigE Vision 2.0 interface with dual-stream output
- C-mount lens mount
Features
Introducing the JAI Fusion Series multispectral prism camera, with two 1/1.8" CMOS imagers that simultaneously captures visible color and near-IR images through the same optical path. The cameras feature 3.45x3.45 μm pixel sizes with support for 1x2, 2x1 or 2x2 binning.
This system reaches up to 123 fps over high performance 10GBASE-T (10 gigabits per second) interface and is backwards compatible to NBASE-T (5GBASE-T/ 2.5GBASE-T) and standard GigE (1000BASE-T). Single and multi-ROI modes provide higher speeds with lower processing loads, with 8.10, or 12-bits per channel.
With excellent shock and vibration resistance and and GigE Vision 2.0 interface with dual stream output, this system is an excellent solution for your high-speed multispectral imaging needs!
| Specifications | FS-3200D-10GE |
|---|---|
| Sensor | 1/1.8" 2-CMOS global shutter (JMX252) |
| Active pixels | 2048 (h) x 1536 (v) x 2 (Bayer/NIR) |
| Frame rate, full frame | 123 frames/sec. @ 8-bit |
| Active area | 7.07 mm (h) x 5.30 mm (v) - 8.83 mm diagonal |
| Pixel size | 3.45 um x 3.45 um |
| System clock | 74.25 MHz (for pulse generator) |
| Read out modes | Full ROI (single): 2048 (h) x 1536 (v) for each channel, H: 16 to 2048 pixels in 16 pixel steps, V: 8 to 1536 lines in 4 line steps. ROI (multi) Binning: Up to 64 areas can be defined, no overlap, 1x2, 2x1, 2x2 (NIR only) |
| EMVA 1288 parameters | 12-bit output format 4-30 p (525 nm), 8.86 p (819 nm), 39-45 dB green, 39.02 dB NIR |
| Traditional SNR | color: >60 dB (o dB gain, 10-bit), NIR: >60 dB (o dB gain, 10-bit) |
| Video signal output (two streams) | Visible:Bayer RGB, BayerRG10, BayerRG10Packed, BayerRG12, BayerRG12Packed, RGB8, RGB10V1Packed, RGB10P32. NIR: Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed. |
| Gain | Manual control - master mode 0 to +24 dB, R/B channels - individually -7 to +15 dB, Auto gain control - off, continuous, one-push |
| White balance (Color channel only) | Off, 4 presets (3200K, 5000K, 6500K, 7500K) or one-push/continuous AWB (3000K to 9000K) |
| Gamma/LUT | 0.45 to 1.0 (9 Steps) or 257-point programmable LUT |
| Shading correction | Flat shading, color shading |
| Trigger input | Opto in (2), Pulse generators (4), software, TTL in (2), NAND Out (2), User Output (4) |
| Exposure modes | Timed/EPS, Trigger Width (to ∞), Auto, Delayed readout option |
| Electronic shutter | (can be set independently for each channel) 14.73 µs to 8 sec. in 1 µs steps |
| Auto Level Control (ALC) | Shutter range from 100 µs, gain range from 0 dB to +24 dB. Tracking speeds and max. values adjustable |
| Blemish compensation | Up to 200 px/channel |
| Operating temp. (ambient) | -5°C to +45°C (20 to 80% non-condensing) |
| Storage temp. (ambient) | -25°C to +60°C (20 to 80% non condensing) |
| Vibration | 3G (20 Hz to 200Hz, XYZ directions) |
| Shock | 50G |
| Regulations | CE (EN61000-6-2, EN61000-6-3) FCC Part 15 Class B, RoHS/WEEE |
| Power (12-pin) | +10V to +25V DC. 10.4 W typical @ +12 V |
| Lens mount | C-mount |
| Dimensions (H x W x L) | 62mm x 62mm x 86.5mm (excl. connectors) |
| Weight | 270 g |