- 200 spectral bands (2-spectral bin)
- 705 frames per second (2-spectral bin)
- 1024 spatial pixels
- Built-in image correction
- GigE Interface
Features
Applications
- Food sorting
- Food quality
- Colour & density in printing
- Display & light source inspection
- Vegetation & agriculture
- Phenotyping
Accessories
Datasheet
The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near infrared (VNIR) region from 400 to 1000 nm.
| Spectral range | 400-1000nm | |
|---|---|---|
| Spectral resolution | 15 nm | typical mean |
| Spectral sampling/pixels | 6.3 nm | with default binning |
| Spectral bands | 100 | with default binning |
| Numerical aperture | 1.7 | with default lens |
| Optics magnification | 0.80 | |
| Effective pixel size | 19.9 x 9.97 μm | at fore lens image plane |
| Effective slit width | 42 μm | at fore lens image plane |
| Effective slit length | 10.2 mm | at fore lens image plane |
| SNR @ max. signal | 420:1 | |
| Spatial samples | 1024 | |
| Bit depth | 12 | |
| Maximum frame rate | 705 fps full range | with 2 spectral binning (up to 9900 fps with 1 band) |
| Binning | 2, 4, 8 spectral and spatial | Default: 2 spectral x 1 spatial |
| ROI | Freely selectable multiple bands of interst | Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI’s |
| Pixel operability | 99.993% | |
| Image corrections | Non uniformity correction, bad pixel replacement, automatic image enhancement (AIE) | One point NUC , AIE: Unified spectral calibration + corrected smile and keystone aberrations |
| Sensor material | CMOS | |
| Sensor cooling | passive | |
| Full well capacity | 90 ke- | |
| Read out modes | IWR / ITR | |
| Optics temperature | Passive | |
| Lens mounts | Custom mounts | |
| Fore lens FOV options | 12 deg, 38 deg (default), 47 deg, 51 deg, 83 deg | Only the default lens is specifically designed for FX10. With other lens options, optical parameters may vary. |
| Camera digital data output/ control interface | GigE Vision | |
| Camera control protocols | GenICam, ASCII | |
| Power input | 12 V DC (+-10%) | |
| Power consumption | Max 4 W | |
| Connectors | Industrial ethernet | |
| IP | IP52 | |
| Dimensions (L x W x H) | 150 x 85 x 71 mm | Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side. |
| Weight | 1.3 kg | |
| Storage temperature | -20 - +50°C (non-condensing) | |
| Operating temperature | +5 - +40°C (non-condensing) | |
| Relative humidity | 5% - 95% (non-condensing) |