Skip to main content
Home Products Visible and Near Infrared Vnir Specim FX10+ (400-1000nm)
FX10+ Image

The Specim FX10+ is a high-speed line-scan hyperspectral camera optimized for applications requiring fast imaging. Its high resolution ensures accurate and detailed imaging at a rapid pace. Specim FX10+ operates in the visible and near infrared (VNIR) region from 400 to 1000 nm.

Spectral range400-1000nm
Spectral resolution15 nmtypical mean
Spectral sampling/pixels6.3 nmwith default binning
Spectral bands100with default binning
Numerical aperture1.7with default lens
Optics magnification0.80
Effective pixel size19.9 x 9.97 μmat fore lens image plane
Effective slit width42 μmat fore lens image plane
Effective slit length10.2 mmat fore lens image plane
SNR @ max. signal420:1
Spatial samples1024
Bit depth12
Maximum frame rate705 fps full rangewith 2 spectral binning (up to 9900 fps with 1 band)
Binning2, 4, 8 spectral and spatialDefault: 2 spectral x 1 spatial
ROIFreely selectable multiple bands of interstMinimum height of ROI is two 1-binned rows. Maximum frame rate is determined by the total number of rows included in the mMROI’s
Pixel operability99.993%
Image correctionsNon uniformity correction, bad pixel replacement, automatic image enhancement (AIE)One point NUC , AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor materialCMOS
Sensor coolingpassive
Full well capacity90 ke-
Read out modesIWR / ITR
Optics temperaturePassive
Lens mountsCustom mounts
Fore lens FOV options12 deg, 38 deg (default), 47 deg, 51 deg, 83 degOnly the default lens is specifically designed for FX10. With other lens options, optical parameters may vary.
Camera digital data output/ control interfaceGigE Vision
Camera control protocolsGenICam, ASCII
Power input12 V DC (+-10%)
Power consumptionMax 4 W
ConnectorsIndustrial ethernet
Dimensions (L x W x H)150 x 85 x 71 mmMounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight1.3 kg
Storage temperature-20 - +50°C (non-condensing)
Operating temperature+5 - +40°C (non-condensing)
Relative humidity5% - 95% (non-condensing)